Leather dye is a penetrating, alcohol-based leather dye. Dries uniformly and mixes easily to create interesting middle tones. This product is created for colouring Veg-tanned leather. Available in many colours (see our colour card).
|Title||Leather dye 946 ml (large bottle) brown Moccasin brown LARGE bottle|
|Color code||Moccasin brown|
*The colourswatches above are on veg-tanned leather.
Take the right precautions (gloves etc.)!
Preparing the paint surface
With this product, Fiebing's advises Fiebing's Deglazer as a product for cleaning/preparing the leather surface. Deglazer removes old shine and finish layers.
Application of the paint
While the leather is still damp from cleaning (see preparation). You can apply the dye evenly with a dauber. For larger surfaces, Fiebing's sponges can be useful. We recommend to apply it in circular motions. Stripes will continue to be seen. A second layer may be applied if necessary. With each layer you apply to the surface, the color darkens.
Applying this paint does require some practice. We strongly recommend test pieces.
Diluting the paint can be done with Fiebing's Dye reducer. Sometimes it also works by slightly diluting it with water (first try on a test piece).
After-treatment of the paint surface
After painting, remove the paint that remains on the surface with a soft cloth. Rub the leather firmly. For a high gloss, you can use the product Fiebing's Resolene as a finish layer. There are several finishes possible see each product for details.
Tip: Use about the black leather dye, black resolene. This makes the color even deeper! (and makes the surface water repellent)
Mixing Dye with Neatsfoot Oil
Mixing Fiebing’s Leather Dye and Prime Neatsfoot Oil Compound. For generations saddle makers and other manufacturers of leather goods have used a combination of oil and dye to both control color as well as to maintain the suppleness of the leather.
To achieve this highly desired result the trick is to mix 6% of Fiebing’s Leather Dye with 94% Fiebing’s Prime Neatsfoot Oil Compound. This works especially well with all of the brown tones and the primary colors like green and blue.
Apply as usual to unfinished, vegetable tanned leather and allow to dry. You can try to buff the surface when dry to remove any excess dye but due to the low concentration of dye in this mixture you should not have much of a rub off issue. Once dry, feel free to seal with Fiebing’s Acrylic Resolene.
The R&D testing at Fiebing's has proven that Fiebing’s Leather Dye combines more effectively with Fiebing’s Prime Neatsfoot Oil Compound then does Fiebing’s Professional Oil Dye. We suggest you use the standard Fiebing’s Leather Dye when attempting this dye/oil combination.