• Largest offer in The Netherlands
  • Over 45 years of experience
  • Fast delivery
  • Large stock

Hole punch single or multiple holes 4-in-1 holes Ø 1 mm, 3 mm tussende gaatjes

Hole punch single or multiple holes

Create holes for lacing and handsewing in supple leather. Thickness of the leather should be 2 mm max. (see matching single punch fine or 6-in-1 fine punch Ø 1 mm)

For punching holes in thicker leather your should use a Diamont stitching chisel or awl.

 

Title Hole punch single or multiple holes 4-in-1 holes Ø 1 mm, 3 mm tussende gaatjes
Article number 810.05e

Specifications

Holpijp fijn enkel of meerdere gaatjes op een rij afmetingen.

 

Disclaimers

  • NOTE! Don't use a rubber or iron hamer. (this will damage the stamps) use a rawhide, poly (nylon) or wooden mallet.
  • Standard 14 day return policy. ( read the terms and conditions here: https://www.boomsmawebshop.com/t/faq/returns).

 

Foundation/Worktop

  • We advise using a nylon cutting block with a piece of thick leather on top. This will expand the life expectancy exponential.
  • Make sure you have a solid non springy foundation/worktop.
  • Never use a wood or metal as a base in combination with knives or punches!
  • The incorrect use of our products will not be compensated!